JBL On Time 200P


AM/FM clock radio and loudspeaker dock for your iPod and iPhone

Product Actions
A small but enormously flexible loudspeaker dock and clock radio.

No more obnoxious buzzers. No more annoying radio commercials (unless you like them, of course). Wake up peacefully refreshed with the JBL On Time™ 200P. This system is a fully loaded loudspeaker dock and AM/FM clock radio with RDS (Radio Data System), 10 presets, seven independent alarms, an intuitive interface, easy-to-use touch controls and an IR (infrared) remote control. And it can start your day with music from your very own iPod, iPhone, tablet, MP3 or CD player, desktop or laptop computer – all in famous JBL® quality. The system’s two high-performance JBL Phoenix transducers deliver big sound with accuracy and detail that you’d never expect from such a small system – only 11-3/16 by 5-3/4 x 2-3/4 inches (284 x 146 x 70 millimetres). Its system equalization is computer-optimized to provide a rich, complete soundstage, and it uses proprietary compression technology to ensure clean, accurate sound at high output levels. The dock’s large, backlit LCD enables easy viewing and menu navigation; automatic dimming sets the correct brightness level in any environment. And it can charge your iPod or iPhone while you sleep. Can your clock radio rock that hard?

Item# JBL ON TIME 200P

General Specifications

Power Consumption 30W
Power Output 2 x 6W
Series On Time

Audio Specifications

Input Impedance >5k ohms
Frequency Response 70Hz – 20kHz
Signal-to-Noise Ratio >80dB
Optimized Compression Topology (OCT) Yes
Computer-Optimized Equalization (COE) Yes

Speaker Specifications

Transducer Phoenix SE 1-3/4" (45mm) x 2 (full range per channel)


Width (mm) 284
Weight (lb) 1.8
Depth (in) 5-3/4
Height (mm) 70
Height (in) 2-3/4
Weight (kg) 0.8
Width (in) 11-3/16
Depth (mm) 146

Video Specifications

Liquid-Crystal Display Yes
Click here for a complete list of all specs for this product

Spec Sheet (EN)

891 KB
  • 1 JBL On Time 200P
  • 2 adapters for iPod/iPhone
  • 1 remote control
  • 1 power supply
  • 1 FM antenna
  • 1 AM antenna
  • 1 audio cable
  • Owner’s manual

Manuals & Downloads

The latest owner's manuals, quick start guides, and documents.

Search Result For ""

Can I dock my iPhone 5 on this device? 

Asked by: STEVE6979
Thank you for the inquiry. No. A 30 pin to lightning connector adapter would be required. Best Regards.
Answered by: Zoltan
Date published: 2017-12-02

can its work for iphon 4

Asked by: villi
Yes; the ON TIME 200P would work well with the iPhone 4. It comes with adapters that can fit all iPods/iPhones before the Lightning Adapter.
Answered by: Ren at Customer Service
Date published: 2018-08-19

if i dont have the am or fm or ipod will the alarm still sound? and how loud is it

Asked by: ccparks77
The ON TIME 200P has a built in am/fm tuner and a buzzer, so yes, it will work fine without an iPod. The volume of the radio can be adjusted for your alarm, but the buzzer is at a level that can't be adjusted. I can't say how loud it is, but can say that I have not heard complaints on the volume of it, so I would assume it is loud enough without being too loud.
Answered by: Joe At Customer Service
Date published: 2016-03-29

Hi JBL How do I tune radio to FM 100.4 as I can only get 100.3 or 100.5 on CT10B18. Thanks Alan.

Asked by: OMNIT

200p loudspeaker has Bluetooth 

Asked by: Kinnri
  • y_2018, m_11, d_16, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_NO, sid_jblontime200p, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl